Principle of work:
After filtering and heating, the air enters the air distributor at the top of the dryer. The hot air enters the drying chamber in the spiral uniformly. By passing through the high-speed centrifugal atomizer at the top of the tower, the material liquid will be rotated and sprayed into extremely fine mist liquid beads. Through the very short time of contact with hot air, the materials can be dried into the finished products. The finished products will be discharged continuously from the bottom of the drying tower and from the cyclone separator. The waste gas will be discharged by an induced fan.
|
spec
|
|
ZPG-25
|
ZPG-50
|
ZPG-80
|
ZPG-100
|
ZPG-150
|
ZPG-200
|
ZPG-300
|
|||||||
|
evaporation capacity(kg/h)
|
|
25
|
50
|
80
|
100
|
150
|
200
|
300
|
|||||||
|
process amount of material liquid(kg/h)
|
|
25-34
|
50-68
|
80-108
|
100-135
|
150-203
|
200-270
|
300-406
|
|||||||
|
output of finished pcoduct(kg/h)
|
|
4.8-7.2
|
9.2-14
|
14.8-22.4
|
18.4-28
|
24-42
|
36.8-56.4
|
55-85
|
|||||||
|
solid content of material liquid( %)
|
|
|
|
|
18-30
|
|
|
|
|||||||
|
moisture content of finished product( %)
|
|
|
|
|
3-5
|
|
|
|
|||||||
|
electric power(kw)
|
|
63
|
|
132
|
153
|
204
|
246
|
330
|
|||||||
|
heat source
|
|
|
|
Steam pius electricity
|
|
|
|
|
|||||||
|
Collecting method of product and its efficiency
|
|
Grade one or two or three stage cyclone wet dust remover is greater than or equal to 95%
|
|
|
|
|
|
|
|||||||
|
automatic control meters and instruments
|
|
indicator of not air and exhaust air temperature
|
|
|
|
|
|
|
|||||||
|
temperature of air inlet(℃)
|
|
160-220
|
|
|
|
|
|
|
|||||||
|
temperature of air outlet(℃)
|
|
80-100
|
|
|
|
|
|
|
|||||||
|
|
L
|
7000
|
8000
|
9800
|
11000
|
12200
|
14100
|
15000
|
|||||||
|
overal dimensions(mm)
|
W
|
4000
|
5000
|
5700
|
6200
|
7000
|
7800
|
9000
|
|||||||
|
|
H
|
6200
|
6900
|
8000
|
8900
|
10750
|
11900
|
13000
|
|||||||
Main Features
1) The tower body is equipped with a cool air jacket to reduce the inside tower temperature and eliminate the product preheating and softening phenomenon.
2) The atomizer on top of the tower is equipped with a cooling device to reduce the atomizer temperature, effectively eliminate material return to the top in eddy current, and avoid the preheat coking phenomenon.
3) The tower body and pipeline are equipped with a manual quick-open cleaning hole and drainage hole. A CIP automatic cleaning device can also be equipped if needed.
4) An automatic control constant temperature feeding tank can be equipped.
5) Manual high-pressure washing tools can be offered as accessories together with the spray dryer.
6) All product contact parts are made with Stainless Steel (or whole parts with stainless steel).
7) The product collection way adopts two-grade cyclones and a water film duster.
8) Air inlet temperature is automatically and continuously controlled by a lever that is interlocked with feeding.
9)An air sweeping device can be optional for some products.
Application
Company Information
