Principle of work:
The tank is heated by heat conduction oil or hot water into the jacket under a vacuum condition. The heat contact with the wet material through the inner wall of the tank. The vapor or other gases that evaporate after absorbing heat from wet materials are removed through the vacuum pump through the vacuum exhaust pipe. Because the tank is in a vacuum state, and the rotation of the tank makes the material constantly up and down, inside and outside, it speeds up the drying speed of the material, improves the drying rate, to achieve the purpose of uniform drying.
|
Model
|
100
|
500
|
1000
|
1500
|
2000
|
5000
|
|||||
|
Volume (L)
|
100
|
500
|
1000
|
15000
|
2000
|
5000
|
|||||
|
Maximum Loading Volume (L)
|
40
|
200
|
400
|
600
|
800
|
2000
|
|||||
|
Maximum Loading Capacity (kg)
|
20
|
100
|
200
|
300
|
400
|
1000
|
|||||
|
Rotating Speed (rpm)
|
3~13
|
|
|
6
|
5
|
4
|
|||||
|
Motor Power (k w)
|
0.75
|
1.5
|
3
|
4
|
5.5
|
15
|
|||||
|
Floor Area (mm)
|
2160 × 800
|
2350× 800
|
2860 × 1300
|
3060 × 1300
|
3260 × 1400
|
4400 × 2500
|
|||||
|
Rotation Height (mm)
|
1750
|
2250
|
2800
|
2940
|
2990
|
4200
|
|||||
|
Design Pressure In Container (MPa)
|
-0.09 to 0.096
|
|
|
|
|
|
|||||
|
Interlayer Design Pressure (MPa)
|
≤ 0.3
|
|
|
|
|
|
|||||
|
Weight (kg)
|
800
|
1200
|
2800
|
3300
|
3600
|
8600
|
|||||
Main Features
1. Because it is drying under vacuum, it has a high rate at low temperature, which is 2 times faster than the general drying equipment. It saves energy and has high heat utilization rate, especially suitable for drying heat-sensitive materials and easily oxidized materials.
2. The machine design, internal structure is simple, easy to clean, the material can be discharged, simple operation.
3. Closed dry, no leakage of products, no pollution, suitable for strong stimulation, and toxic material drying.
4. The material in rotation mixing dry, can dry the material to a very low water content (≤0.5%), and good uniformity, suitable for different material requirements.
5. The equipment structure is compact, covers an area of small, easy to operate, reduce labor intensity, save labor.
6. The user can choose stepless speed regulation (1-10 RPM) and step speed regulation (6-10 RPM), convenient for high-speed drying ability, and adapt to different requirements.
2. The machine design, internal structure is simple, easy to clean, the material can be discharged, simple operation.
3. Closed dry, no leakage of products, no pollution, suitable for strong stimulation, and toxic material drying.
4. The material in rotation mixing dry, can dry the material to a very low water content (≤0.5%), and good uniformity, suitable for different material requirements.
5. The equipment structure is compact, covers an area of small, easy to operate, reduce labor intensity, save labor.
6. The user can choose stepless speed regulation (1-10 RPM) and step speed regulation (6-10 RPM), convenient for high-speed drying ability, and adapt to different requirements.
Project Case
Application
This machine is suitable for vacuum drying and mixing of powder and granular materials in food, chemical and other industries, especially for drying under the following requirements:
1. Can not accept high-temperature heat-sensitive materials
2. Need to recover solvent and toxic gas materials
3. Easy oxidation and dangerous materials
4. Materials with requirements for crystalline shape
5. Materials with very low content of residual volatiles are required
FAQ
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai. It only takes you about 1 hour to get to Changzhou. Or we can visit you in Shanghai.
Q: What’s the quality of your products?
A: Parts of our products come with the best quality, and our products have passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can
Rest assured with the quality absolutely.
Q: What to do if the machine has a problem?
A:24-hour timely response to mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: Our warranty period is one year, generally.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after both sides' discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF, please give us your delivery port, and we will give you CIF
price.
A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai. It only takes you about 1 hour to get to Changzhou. Or we can visit you in Shanghai.
Q: What’s the quality of your products?
A: Parts of our products come with the best quality, and our products have passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can
Rest assured with the quality absolutely.
Q: What to do if the machine has a problem?
A:24-hour timely response to mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: Our warranty period is one year, generally.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after both sides' discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF, please give us your delivery port, and we will give you CIF
price.
